Provision Processing System

Press SELECT first and hold then press UNITS/Power for 2 seconds at the same time.  The screen will go to [BUILD]

Press ZERO key 2 times to get [CAL]

Press the TARE key 1 time to get [ZERO]

Remove all weight from the platform 

Press the SELECT key one time to get weight flashing

Press  PRINT key one time [Z in 1 P] then [0.00]

Press TARE key one time to get [ZERO]

Press TARE key one time to get [SPAN]

Press SELECT key one time (if you get CLR then press the f (OK) key)

Add calibration weight to the scale

To edit the weight

     SELECT will select the digit · PRINT will edit the digit (scroll up)

Press the f (OK) key to get S in P then the weight will show

To save Press the select and power again and hold till saving.